TURN SANDING BLOCKS INTO FOAM CONES

 

I removed the sanding surface and cut the foam sanding block in half


I glued the two halves together with 3m Super 77 Spray Adhesive.


I cut the foam into two 1 1/2″ x 1 1/2″ blocks.

I used a flat washer with screw and nut, also used some 3-M double sided tape to secure the foam block to the flat washer.


I used my drill press and 60 grit sandpaper to slowly form the foam block into a cone shape. You may want to wear breathing protection. The process does make some dust. It probably took me about five minutes to do.

The double sided tape becomes less sticky, so use new tape for each cone you do.



 DIY ELECTRONIC DRUM TUTORIALS

Build Electronic Drums – My first project

Build Electronic Drums Using Drum Shells

Acoustic Drums to Electronic Drums

Acoustic Bass Drum to Electronic

Build an Electronic Drum Kit with Buckets

Bucket Bass Drum

Rock Band Drum kit 8″ Mesh Drum Head Mod

Rock Band Drum Kit – My First RB Drum Set


BUILDING DRUM ACCESSORIES

10 inch Wood Drum Hoop

8 inch Wood Drum Hoop

Electronic Drum Mount

DIY Window Screen Mesh Drum Heads

Turn Sanding Blocks into Foam Cones

L Rod Clamps




Back to Top